accessories l instruction manual l 4-conductor cable (with a connector; 2 m) a4372-02 infrared detector amplifier for infrared detector low noise amplifier for ingaas, pbs, pbse and mct detector C4159/c5185 series , c3757-02 absolute maximum ratings (ta=25 c) parameter value unit operating temperature 0 to +40 c storage temperature -20 to +70 c amplifiers for photovoltaic detectors (typ.) parameter C4159-01 C4159-04 C4159-05 C4159-02 C4159-03 unit applicable detector insb (dewer type) * 1 ( 0.6 mm, 1 mm) insb (dewer type) * 1 ( 2 mm) inas (p7163) ingaas ingaas - conversion impedance 10 8 , 10 7 , 10 6 (3 ranges switchable) 2 10 7 , 2 10 6 , 2 10 5 (3 ranges switchable) 10 8 , 10 7 , 10 6 (3 ranges switchable) 250 to 5 10 3 continuous 10 7 , 10 6 , 10 5 (3 ranges switchable) v/a frequency response (amp. only, -3 db) dc to 100 k dc to 45 k dc to 15 k 20 to 120 m dc to 15 k hz output impedance 50 50 50 50 50 ? maximum output voltage (1 k ? load) +10 +10 +10 1.3 +10 v output offset voltage 5 5 10 30 5 mv equivalent input noise current (f=1 khz) 0.15 * 2 0.55 0.15 (10 8 , 10 7 range) 0.65 (10 6 range) 30 2.5 pa/hz 1/2 reverse voltage impossible internally generated can be applied from external unit - external power supply 15 15 15 v current consumption * 3 +30, -10 max. +90, -60 max. 15 max. ma note) output nose voltage = equivalent input noise current conversion impedance amplifiers for photoconductive detectors (typ.) parameter c5185 c5185-01 c3757-02 unit applicable detector mct (dewar type), insb (p6606 series) mct (p3981/p2750 series) * 4 pbs, pbse - input impedance 5 5 10000 k ? voltage gain 66 ( 2000) 66 ( 2000) 40 ( 100) db frequency response (amp. only, -3 db) 5 to 250 k 5 to 250 k 0.2 to 10 k hz detector bias current 5 ma, 10 ma, 15 ma (3 ranges switchable) 0.1 ma, 0.5 ma, 1 ma (3 ranges switchable) internal bias - output impedance 50 50 50 ? maximum output voltage (1 k ? load) 2.5 2.5 10 v equivalent input noise voltage (f=1 khz) 2.6 1.2 40 nv/hz 1/2 external power supply 15 15 15 v current consumption * 3 +60, -10 max. +60, -10 max. +15, -15 max. ma note) output noise voltage = equivalent input noise voltage voltage gain *1: amplifiers for multi-element detectors are separately provided. *2: 0.65 pa/hz 1/2 when conversion impedance is se t to 10 6 v/a *3: recommended dc power supply (analog power supply): 15 v current capacity: more than 1.5 times the maximum current consumption ripple noise: 6 mvp-p or less *4: preamp for p3257-30/-31 available upon request 1
amplifier for infrared detector C4159/c5185 series, c3757-02 hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184, www.hamamatsu.com u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 08152 -3750, fax: (49) 08152-2658 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?2005 hamamatsu photonics k.k. cat. no. kird1011e07 nov. 2005 dn 12.5 25 15 23 35 37 60 in power out high mid low 24.5 23 26.2 85 39.5 11.5 gain adjusting screw bnc connector preamplifier 4-pin connector offset voltage adjusting screw bnc connector 4-pin connector 60 30 39.5 11.5 12.5 preamplifier out in power bnc gain adjusting screw 85 25 14 14 4-pin connector 30 60 in power out high mid low 24.5 85 39.5 11.5 bias adjusting screw bnc connector bnc 18 18 30 21.2 preamplifier bnc connector 4-pin connector 38.5 13.5 preamplifier out in power 85 30 12 18 18 12.5 25 37 60 kirda0046ea dimensional outlines (unit: mm) kirda0047ea kirda0048eb kirda0049ea c5185/-01 c3757-02 C4159-01/-03/-04/-05 C4159-02 2
|
